Uni-Solar framed solar module ES-62W
The Uni-Solar modules are exceptionally durable. They are encapsulated in UV-stabilised polymers and framed with anodised aluminium. The polymer encapsulation includes EVA and ETFE. A Galvalume® steel backing plate provides stiffness. Bypass diodes are connected across each cell, allowing the modules to produce power even when partially shaded. The ES-62 modules come standard with a Multi-Contact® connectors. The cable is a 2-conductor 12 AWG (22 in./ 560 mm) with insulation rated at 194°F/90°C. The Uni-Solar ES-62 & ES-124 modules are appropriate for all applications from simple single module requirements to larger grid-connected applications.
Uni-Solar framed modules are used with permanent module racks that can be adjusted for optimum tilt, wind resistance and exposure to sunlight. These glass-free, lightweight, vandal resistant modules can be utilised in a wide variety of applications from battery charging applications to grid connected systems. The framed modules are often used as building blocks in photovoltaic arrays, which can be assembled to meet virtually any load from less than 100 watts to multi-megawatts. All solar panels are rated in terms of peak power output (watts). Outdoors, under normally higher operating temperatures, solar panel performance changes, depending on temperature, solar spectrum (light color) and related effects. Uni-Solar products are less affected by temperature than monocrystalline or polycrystalline solar technology products. The result is up to 20% more delivered energy.
Applications:
• Large grid-connected systems
• Off-grid solar home systems
• Water pumping or desalination systems
• Telecommunications
• Gate opening or fence charging
• Bus or animal shelters
Features:
• High temperature and low light performance
• 20 year warranty on power output at 80%
• Multi-contact connectors or junction box
• Bypass diodes for shadow tolerance
• UL listed to 600 VDC
• Safety Class II up to 1000 VDC
• Meets IEC 61646 requirements
Uni-Solar modules comply with the following qualification tests:
• UL listed up to 600 VDC
• Safety Class II up to 1000 VDC
• Meets IEC 61646 requirements
• Thermal cycling
• Humidity-freeze test
• Damp heat test
• UV-test
• Wet insulation test
• Mechanical load test
• Hail impact test
• Robustness of terminations test
Framed modules certified by TÜV Rheinland as Safety Class II equipment for use in systems up to 1000 VDC. Listed by Underwriter's Laboratories for electrical and fire safety (Class A Max. Slope 2/12, Class B Max. Slope 3/12, and Class C Unlimited Slope fire ratings) for use in systems up to 600 VDC.
Datasheet:
Technical Specifications
| Manufacturer | Uni-Solar |
| Country of Origin | USA |
| Rating (W) | 62.00 |
| Height (mm) | 1257 |
| Width (mm) | 792 |
| Depth (mm) | 32 |
| Weight (Kg) | 10.90 |
